How To Set Up Dvd Player To Samsung Tv

Download Article

Download Article

• Powering On the DVD Player
|
• Connecting with HDMI Cable
|
• Connecting with A/V Cables
|
• Connecting with Component Cables
|
• Troubleshooting

DVDs are ubiquitous in the amusement world today, and DVD players can be purchased for less than the price of a nice dinner. Hooking upwardly a DVD player to your TV will give you lot admission to endless hours of movie-watching bliss, and well-nigh modern TVs and DVD players make the setup process a cakewalk.

1. 1

   Plug in the DVD histrion and make sure it turns on. Before trying to claw upward your histrion, make sure it is plugged in and turns on when you press the "power" button. Usually a small-scale lite or welcome message appears when the DVD player is working correctly.

2. 2

   Determine what type of connection you need. At that place are at three common ways to connect a DVD actor, and each needs a dissimilar cable to work. Your DVD player should come up with all of the advisable cords, just y'all need to bank check which connections your Television accepts as well. Look into your possessor'south manuals or check the TV and DVD Player yourself to see what connections you lot can use. The three most common are.

   • HDMI: The most modern connectedness, HDMI resembles a longer, thinner USB cord. HDMI connections are the highest quality connections and yous only demand 1 cord for both the audio and video.
   • A/Five Cables (Three-Prong): Standing for Audio/Visual cables, this the most mutual connectedness for DVDs. There are three prongs at either end-- red, yellow, and white -- and they lucifer up to corresponding colored inputs on both the TV and DVD role player.
   • Component Cables: Sporting better quality than A/V cables but less than HDMI, component cables are a set up of v colored prongs attaching to five matching inputs on both the TV and the DVD actor.

   Advertisement

3. 3

   Find the advisable cable for your connection. Once you know what connexion y'all will use, locate the cable and make sure it is not torn or frayed. If yous demand a new cable, or are missing one, take a picture of the input you desire and bring it to your local electronics store to find a replacement.

   • If possible, employ an HDMI cable, as they are the easiest to install and have the best quality video.

4. four

   Identify the DVD histrion close to the television. Once you know what connection yous will need, brand sure you put the DVD player close enough to the TV and then that you lot can reach the appropriate cables to the back.

   • Practice not stack different electronic equipment on superlative of one some other -- they can quickly heat upwardly when in use and impairment the electronics.

5. v

   Plough off the DVD histrion and TV earlier you continued them. This prevents the likelihood of electric shocks and protects the equipment.

6. 6

   Know that the same procedures piece of work for a projector. Near projectors have the same set up of inputs equally TVs, and so don't be intimidated if you want to claw up a projector instead.

   • Some projectors use a "DVI Input" instead of the 3 connections listed above. If so, follow the same procedure as "Connecting with an HDMI Cable," substituting a DVi cable for an HDMI.^[1]

Advertisement

1. ane

   Plug the commencement end of the cablevision into the HDMI socket on the DVD player. Await for the "HDMI" or "HDMI Out" label and fit the cable securely into the socket.

   • This is the highest quality connection for audio and video and is typically institute only on modern DVD players.

2. two

   Plug the second terminate of the cable into the HDMI socket on the Idiot box. Just similar DVD players, but newer TV's have HDMI sockets. In that location may be multiple sockets available. Each HDMI socket will exist labeled "HDMI" or "HDMI In" along with a potential input number.

   • If there is an input number, like "HDMI 1," remember information technology for subsequently. This is the setting your Television set must be fix at to see your movies.

3. 3

   Make sure that both HDMI connections are secure. An HDMI connection only requires one cable that carries both audio and video bespeak, and it does non affair which cease goes where. Simply if the cable is pulled too tightly, or i of the connections is loose, you may not get a good point.

   • There are a lot of different HDMI cords available, but unless you lot want pristine, perfect movie then any length and type of cord will work just fine as long as it reaches.^[2]

4. 4

   Ability on the DVD player and Idiot box. Insert a DVD so that you can exam both the picture and the audio.

5. 5

   Switch the TV to the correct input using the "source" button on your Goggle box or Remote. Sometimes labeled "input," this button allows you to switch where your TV gets the video and sound information. The input you choose on the Television receiver should match the input yous used for the cables.

   • If at that place is non a label or yous don't know what input to use, go out the DVD player on and test each input for five-10 seconds to run across where the video appears.

Advertisement

1. 1

   Plug in one finish of the A/5 Cables to the Output sockets on the DVD player. The sockets are color-coded to match the cable (Crimson, White, and Yellow). Look for the "Output" or "Out" group. The Scarlet and White sockets (Audio) may exist separated from the Yellow one (Video).

   • The set of sockets are typically grouped together with a border or line indicating the included sockets.

2. 2

   Plug in the other end to the matching input sockets on the TV. Like on the DVD role player, these will exist colour-coded to match the cable and grouped into input groups. Look for the "Input" or "In" designation. A/Five inputs are typically numbered to indicate which input you volition demand to select on the TV.

   • The input sockets are usually grouped together, and are oft marked by a border or a line separating the group from the other Inputs.
   • The Ruddy and White sockets (Sound) may be separated from the Yellow ane (Video). The labels should indicate which socket goes with which Input.

3. 3

   Make sure your connections are snug and matched to the right colour. Lucifer the colored plugs on the cable to the colored sockets on both the DVD player and Tv.^[3]

   • The Yellow video plug may be a separate cablevision from the Crimson and White audio cable.

4. 4

   Ability on the DVD histrion and Tv. Insert a DVD and then that you lot can exam both the picture show and the sound.

5. 5

   Switch the Tv to the correct input using the "source" button on your TV or Remote. Sometimes labeled "input," this button allows you to switch where your Boob tube gets the video and sound information. The input you lot choose on the Tv set should match the input you lot used for the cables.

   • If there is not a label or you don't know what input to use, leave the DVD actor on and examination each input for v-x seconds to see where the video appears

6. 6

   Ensure that A/Five or cables are plugged in correctly. If you are only getting video or simply getting audio, or you aren't getting whatever signal at all, your cable may be plugged in incorrectly. Bank check to make sure that each colored plug is fastened to the correctly colored socket.

   • If the video is non showing up, ensure that the Yellow plug is connected to the right Input on the TV and Output on the DVD role player.
   • If the audio is not coming through, ensure that the Red and White cables are plugged into the correct Input on the Television set and the correct Output on the DVD player.

Advertizement

1. 1

   Plug all five cords on one stop into the corresponding sockets on the DVD actor. The sockets are color-coded to lucifer the cablevision (Light-green, Blue, Cherry, White, Scarlet) and are typically grouped and labeled. Expect for the "Output" or "Out" group. The Green, Blue, and Reddish sockets (Video) may exist separated from the Cherry-red and White pair (Audio), so make sure all five cords are plugged in.

   • Yous will notice that a component cablevision has two Red plugs, which can brand things confusing. To effigy out which is which, lay the cablevision out apartment so that all of the prongs line up. The gild of colors should exist Greenish, Blueish, Red (video), White, Reddish (sound).
   • Some component cables only have the Green, Blue, and Ruby video plugs. You will need a divide Carmine and White plug audio cablevision in order to hear your DVDs, like the ane found in the A/V section above.

2. 2

   Plug the other side of the cables into the input sockets on the Goggle box. Similar on the DVD player, these will be colour-coded to match the cablevision and grouped into Input groups. Look for the "Input" or "In" grouping. They are typically numbered to point which Input you select on the Television.

3. iii

   Make certain your connections are snug and matched to the right color. Match the colored plugs on the cable to the colored sockets on both the DVD player and Boob tube.

4. iv

   Ability on the DVD player and Idiot box. Insert a DVD then that yous tin can test both the moving-picture show and the audio.

5. 5

   Switch the TV to the right input using the "source" push button on your TV or Remote. Sometimes labeled "input," this push button allows y'all to switch where your Telly gets the video and sound information. The input y'all choose on the Television should match the input you used for the cables.

   • If there is non a label or you don't know what input to employ, get out the DVD thespian on and test each input for five-x seconds to run into where the video appears

6. 6

   Ensure that your component cable is plugged in correctly. If y'all are merely getting video or but getting sound, or you aren't getting whatsoever signal at all, your cable may be plugged in incorrectly.

   • If the video is not showing up, make sure that the Green, Blueish, and Red video cables are plugged into the right Input on the Tv set and the correct Output on the DVD player.
   • If the audio is not coming through, ensure that the Reddish and White cables are plugged into the right Input on the TV and the correct Output on the DVD player.
   • Double cheque that the Scarlet cables are plugged into the correct sockets. If they are in the wrong ones, both the audio and video will be messed upward.

Advertizement

1. i

   Make sure that the DVD actor is plugged into a ability outlet. DVD players need a power source in social club to work, so double-check that the player is plugged into the wall or a power strip.

2. 2

   Check all of the Input or Auxiliary channels. DVD players will display on one of the Input or Auxiliary channels. They volition not prove upwardly on Aqueduct iii or four like some VCRs.

   • Some TVs volition characterization the Input channels based on the type of input, such as "HDMI", "AV", and "COMPONENT." Refer back to Method one if you take a question about which input blazon you are using.

3. 3

   Try a dissimilar cablevision. Sometimes, erstwhile cables tin can become frayed and the plugs can start coming loose. This can lead to a poor or nonworking connection. Try a new cable to see if your problem can be fixed.

   • Annotation: There are a lot of companies that market extremely expensive cables. For the well-nigh function, you volition non meet any significant difference using loftier-end cables. This is especially true for HDMI, where a $v cable will perform the aforementioned as an $80 cable.^[iv]

Advertisement

Add New Question

• Question

  Why is my DVD role player in blackness and white?

  

  This reply was written by one of our trained team of researchers who validated it for accurateness and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Reply

  There are several possibilities here. One is that you've non connected the cables properly; check that the cables match the color coded jacks they've been fastened two. The second possibility is that there is a fault with the chroma signal due to either the connections or chipset having a fault. The third possibility is that the color saturation on your display has been turned down to black and white by mistake––unusual but worth checking. Or, finally, you may have inserted a black and white DVD, somewhat mutual with older Television set shows and movies that you lot expected to be in color or colorized merely were not.

• Question

  How do you claw upwardly a DVD player to a smart Television receiver?

  

  This answer was written past one of our trained squad of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Reply

  You'll need to hook up the DVD player to a smart Tv set using either an HDMI, blended, component or S-Video cable. The instructions accompanying your new smart TV should make it articulate which is the correct cable and will likewise explain how to identify the cables into the sockets of both devices. One time connected, yous need to select the proper source or "input" on your Idiot box to be able to view the DVD player for use. Detailed instructions for i type of smart TV, a Samsung TV, tin be constitute hither: How to Connect a DVD Actor to Samsung Tv.

• Question

  Tin I plug yellow into green?

  

  This reply was written past one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Respond

  In some of the newer TVs, there isn't a standard White, Ruddy, Yellowish socket sequence; rather information technology may be White, Red, Green. The matter to endeavour here is to see if the Light-green socket is either labeled Video (in a higher place or beneath), or has a yellow line around the light-green. Either of these indicates that information technology is okay to use the Light-green socket for the Yellow component. Test the connexion by switching on both the Television receiver and DVD player; y'all might need to cycle through the Tv set input channels via your remote to fine tune the color.

• Question

  How do you connect component cables?

  

  This reply was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.

  

  wikiHow Staff Editor

  Staff Answer

  The five cords should exist plugged into the respective color sockets on the DVD player; to decide where to put the two red plugs, lay the cablevision flat and line all prongs up to testify the order of Green, Bluish, Red (video), White, Ruby-red (sound), then place them into the sockets in that club. The other side of the cable prongs should be plugged into the Television sockets, following the colour matches. Check they fit well, then plow on the TV and DVD player to check the connection. This is a really basic "nutshell" overview, the article above provides clear details with images for yous to follow carefully.

• Question

  Why is there video but no sound when I hook up the HDMI cable?

  

  One frequent event is that that the sound output isn't specified correctly. For instance, if you attach a TV set to a laptop via HDMI, you lot accept to tell the laptop that you desire it to send the sound to the Goggle box through the HDMI and not through the laptop's born speakers as yous normally would. You lot can exercise that using the control panel of your computer's operating organization.

• Question

  I have tried connecting my DVD to my HDTV, but I become only sound. What am I doing wrong?

  

  Did you lot connect everything using the right color cable? If there are two of the aforementioned colors, try both, i at a time.

• Question

  I have a 3-prong DVD player, simply there are no extra prong connectors on the TV to plug them in. What should I do?

  

  Assuming the three prongs are the red, white and yellowish RCA cables and the Idiot box has a HDMI connection, and then yous'll need a RCA input converter. The DVD player will connect to the converter, and you'll demand an HDMI cable to connect the converter to the TV. The converter will probably cost $15-25.

• Question

  In that location is no yellow plug pigsty on my TV. Where exercise I plug the yellow string?

  

  The yellow plug is just an extra. You're non supposed to plug that one in unless the white one is non working.

• Question

  Does the Tv demand to be on a sure channel to claw up a DVD player?

  

  If you are only hooking upwards the DVD player, no information technology doesn't. If you are going to watch a picture show on the DVD role player, then yep.

• Question

  HDMI cablevision used works well for film but in that location is no sound - how do I fix this? The volume is up and not on mute.

  

  There might exist a problem with either the input, or the cablevision itself. Endeavour a different HDMI cable. If this does not piece of work, then information technology might be your TV or DVD player. Another selection is to use a digital optic cable or a red and white cable. Your TV will well-nigh probable have multiple audio inputs. If you lot want ameliorate sound quality, use the digital optic, because red and white is simply two channel.

Show more answers

Enquire a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advertisement

• The DVD player volition most likely come with a "Quick Beginning Guide", which volition provide basic instructions on how to fix the DVD actor and start using it.

Thanks for submitting a tip for review!

Advertisement

Nigh This Commodity

Commodity Summary Ten

1. Make up one's mind which type of connector you'll apply.
two. Connect the necessary cable from the player to the Television set or receiver.
3. Connect audio cables if desired.
iv. Turn the DVD thespian and Telly on.
5. Use the Television remote to switch the ″source″ to the DVD actor.

Did this summary help you?

Thanks to all authors for creating a folio that has been read i,840,202 times.

Is this commodity up to date?

Source: https://www.wikihow.com/Hook-Up-a-DVD-Player

Share this post